Rack Accessories

Tool Boards

 

 

Tool Board 1

ToolBoard1_photo_sm A. #311248 (2 lbs.) Sheet metal hook, small fl at nose: Used for pulling sheet metal or in combination with clamps. 2-ton (1814 kg) capacity.

B. #311246 (2 lbs.) Sheet metal hook, large fl at nose: Used for pulling sheet metal or in combination with clamps. 2-ton (1814 kg) capacity.

C. #311135 (2 lbs.) Handy link: Use as a chain shortener or to connect two chains together so you always have the right length. Designed for use with a 3/8″ (10 mm) chain. 6-ton (5443 kg) capacity.

D. #311130 (2 lbs.) Handy Hook: Makes hook-ups easy. Chain is never too long and doesn’t need a hook to pull. Designed for use with a 3/8″ (10 mm) chain.

E. #311215 (11 lbs.) 3MA Multi-adapter plate: Designed to fi t a wide variety of strut towers and for pulling over and around obstructions such as fenders. Use with the numerous angle puller for fast hook-up and pulling in any direction. Hole allows for center strut easurement with a tram gauge. Includes (3) 4-way legs with large bases for good pulling upport and various hold sizes to fi t most vehicles. 5-ton (4536 kg) capacity.

F. #311249 (2 lbs.) Sheet metal hook, small round nose: Used for pulling sheet metal or in combination with clamps. 2-ton (1814 kg) capacity.

G. #311247 (2 lbs.) Sheet metal hook, large round nose: Used for pulling sheet metal or in combination with clamps 2-ton (1814 kg) capacity.

H. #311170 (2 lbs.) Numerous Angle Puller (NAP): For use with a multiadapter plate or back-up plates. Put bolt through a 1/2″ (13mm) hole and pull from any angle. Designed for use with a 3/8″ (10 mm) chain. 4-ton (3629 kg) capacity.

I. #311621 (5 lbs.) Board with hooks.

 


Tool Board 2

 

ToolBoard2_photo_sm A. #311320 – Multi Angle Clamp (MAC) (8 lbs.): Allows pulling from any direction within 180° arc and the side-pull plate makes two-way pulling fast and easy. Gator teeth provide a 3 3/4″ x 3/4″ (95 mm x 19 mm) gripping surface for pulling on narrow seams and pinch welds. 4-ton (3629 kg) capacity.

B. #311085 – Box Clamp (10 lbs.): Reaches around metal to get to hard-to-reach surfaces. Great for pulling on box rails with welded on bumper fl anges. Gator tooth design provides 2″ x 2″ (51 mm x 51mm) gripping surface.

C. #311420 – G Clamp (6 lbs.): 4″ (102) mm throat opening to get over, around and behind damage. Movable shackle allows multiple pull angles. Swivel pad included. 5-ton (4536 kg) capacity.

D. #311150 (3 lb.) Panel Puller (3 lbs.): For use on fender openings, deck lids, door posts and other openings. Can be used with slide hammer or pulling post. 3-ton (2722 kg) capacity.

E. #311475 Regular Deep Hook Set (19 lbs.): Fast hook-ups on cowls, door posts and trunk openings, or to reach into cramped places. 6″ (152 mm) depth and 12″ (305 mm) reach. Includes small (2″ x 2″) (51 mm x 76 mm) bracket and large (2″ x 9″) (51 mm x 229 mm) bracket. 5-ton (4536 kg) capacity.

F. #311641 Board with Hooks (5 lbs.)

 


 

Tool Board 3

ToolBoard3_photo_sm A. #311025 (7 lbs.) B Clamp: The most popular clamp around. Great for hard pulls on heavy metal or frames. Self-tightening, 2 1/4″ x 1″ (57 mm x 25 mm) gripping surface with straight-cut tooth pattern. 6-ton (5443 kg) capacity.

B. #311030 (7 lbs.) C Clamp: Self-tightening. 2″ x 5/8″ (51 mm x 16 mm) gripping surface with straight-cut tooth pattern. 1 1/2″ (38mm) wide throat to fi t over fl anges or frame horns or pull from behind lips. 6-ton (5443 kg) capacity.

C. #311248 (2 lbs.) Sheet metal hook, small fl at nose: Used for pulling sheet metal or in combination with clamps. 2-ton capacity.

D. #311465 (2 lbs.) Cable sling: Use in tight areas where a chain will not fi t or use as a choker. Capacities: Vertical, 1.5-ton (1361 kg); Choker, 1 ton (907 kg); Basket, 2.5-ton (2268 kg).

E. #311195 (2 lbs.) Track hook: Provides quick tie-down or back anchoring on frame racks or track systems. Can also be used for pulling or chain lengthening or shortening. Designed for use with 3/8″ (10 mm) chain. 8-ton (7.3 metric ton) capacity.

F. #311045 (5 lbs.) Jr. Clamp: Self-tightening, 1 1/2″ x 3/4″ (38 mm x 19 mm) gripping surface with straight-cut tooth pattern. A clamp no body shop should be without. 5-ton (4536 kg) capacity.

G. #311130 (2 lbs.) Handy hook: Makes hook-ups easy. Chain is never too long and doesn’t need a hook to pull. Designed for use with a 3/8″ (10 mm) chain. 5-ton (4536 kg) capacity.

H. #311155 (5 lbs.) Sill hook: Straightcut tooth pattern provides 2 1/2″ x 1″ (64 mm x 25 mm) gripping surface. Great for a quick pull almost anywhere. 7-ton (6350 kg) capacity.

I. #311400 (2 lbs.) Tower chain: Used to correct strut towers by attaching to existing bolt holes. 2-ton (1814 kg) capacity.

J. #311360 (5 lbs.) Hole plug: Use in existing holes in body and frame for unlimited anchoring hook-up. Four different size hooks to fi t in various size holes. Fastens directly to 3/8″ (10 mm) chain 5-ton (4536 kg) capacity.

K. #311455 (1 lb.) Nylon sling: Great for pulling on door post or anywhere a chain may damage the structure. Can also be used as a cinch. Capacities: Vertical, 2.5-ton (2268 kg); Choke, 2-ton (1814 kg); Basket, 5-ton (4536 kg).

L. #311651 (5 lb.) Board with hooks.

 


 

Tool Board 4

ToolBoard4_photo_sm A. #311005 (6 lbs.) Angle bite clamp: 45° head for hard-to-pull areas. Self-tightening, self-cleaning. 5-ton (4536 kg) capacity.

B. #311040 (3 lbs.) Mini C-Clamp: Deep throat clearance to reach around fl anges and lips. 5-ton (4536 kg) capacity.

C. 311142 (8 lbs.) Twin claw clamp: Self-tightening. Use around lips of core supports and aprons, plus great for pulling fl oor pans. 7-ton (6351 kg) capacity.

D. #311562 (2 lbs.) GM-R hook with grab hook: Use to anchor before pulling. 4-ton (3629 kg) capacity.

E. #311458 (4 lbs.) 30″ sling with pear and triangle: This versatile sling protects fi nishes and is ultra-useful for pulling on pillars that can’t be clamped. Capacities: Vertical 2,400 lbs. (1088 kg); Choke 1,500 lbs. (680 kg); Basket 2-ton (1814 kg).

F. #311160 (6 lbs.) Mini spring clamp: Use with slip hook for fast connect. For light sheet metal in tight places. Easy one-handed tightening. 3-ton (2722 kg) capacity.

G. #311160 (6 lbs.) Versa Hook: Super useful tool for tie-downs or for pulling rocker panels, door posts, etc. Versa hook end is 2 1/2″ wide. 8-ton (7257 kg) capacity.

H. #311187 (6 lbs.) Swivel self-tightening clamp: New 135° multi-angle swivel clamp has a severe-duty angled tooth design plus drop-forged round wedge to provide the exact pull angle. 10 -ton (9073 kg) capacity.

I. #311463 (2 lbs.) Ford T-hook with grab hook: Fits Ford anchoring holes, great tie-down hook. 4-ton (3629 kg) capacity.

J. #311663 (5 lbs.) Board with hooks

 


 

Tool Board 5

 

ToolBoard10_photo A. #311030 C Clamp
B. #311035 Dyna-Mo Clamp
C. #311045 Jr Clamp
D. #311050 Dyna-Mo Jr
E. #311060 Dyna-Mo W
F. #311083 T.O. Clamp
G. #311090 Long Nose Clamp
H. #311095 Baby Box Clamp
I. #311100 Big Mouth Clamp
J. #311150 Panel Puller
K. #311155 Sill Hook
L. #311195 Track Hook
M. #311215 Adapter Plate
N. #311248 Small Flat Nose SMH
O. #311246 Large Flat Nose SMH
P. #311360 Hole Plug (2 each)
Q. #311323 Double Grab Hook (2 each)
R. #311390 Door Post Puller/Twister
S. #311420 G Clamp
T. #311464 “T” Hook Tie-Downs (2 each)
U. #311458 Slide-Through Sling
V. #311465 Cable Sling
W. #311475 Deep Hook Set
X. #311671 Tool Board with Hooks

 


 

Tower Jack SystemTowerJack_photo

#656000, 64 lbs.

Includes

  • Tower Bracket
  • Lift Tube
  • Pinch Weld Slide Bracket
  • Frame Rail Slide Bracket
  • 1″ x 4 1/2″ Pin
  • 1″ x 7″ Pin

 

Safety And Limitations

  • Jack is not to be used on a vehicle with a GVW of more than 9000 pounds.
  • It is only to be used for lifting underneath the vehicle.
  • Extreme caution must be used every time a vehicle is lowered to avoid the risk of damaging the vehicle and serious injury to the operator.

 


 

Other Accessories

Tower Extension Kit

towerextention832430

 

Includes Tower Extensionm Overhead Puller, Tower Roller & 20′ chain w/Grab hook
#832430 (149 lbs)

 

 

 

 

 


 

Power Pusher Complete

powerpusher784255

Includes United hyd 10 Ton Ram and Adapters
#784255 (150 lbs)

 

 

 

 


 

Dead Car Dolly

DeadCarDolly
To be used with wheel stands and winch for loading disabled vehicles.
#684210 (42 lbs)

 

 

 

 


 

Chasis Liner™ Chain Board

ChainBoard
Never again run short on chains for your frame rack! This board contains four 5′ chains, four 10′ chains and four chain shorteners. All parts are zinc plated for lasting durability.
#702000 (127 lbs)

 

 

 

 

 

 


 

 

Chain LockChainLock

Exclusive to Chassis Liner’s™ slotted towers. Allows for holding one pull while continuing second pull.
#684070 (10 lbs)

 

 

 

 


 

 

Down–Pull RollerDownPullRoller

Allows versatile down-pulls from any angle with hundreds of possible positions. Simple, quick and easy – it truly works!
#682020 (20 lbs)

 

 

 

 


 

Double Pulley Tower Roller

DoublePulleyTowerRoller
Hook 2 chains at one to make a double pull.
#682017 (20 lbs)

 

 

 

 


 

Fast Jack™ — 2 Bag

FastJackWAdapters
Lift capacity: 4,500 lbs. (2041 kg)
Minimum Height: 6 1/2″ (165mm)
Maximum Height: 15 1/2″ (394mm)
#784162 (34 lbs)
4″ Extension for Fast Jack
#314015 (3 lbs)
Pinchweld Adapter for Fast Jack
#314020 (5 lbs)

 

 

 


 

Fast Jack™ — 3 Bag

FastJack3Bag
Lift capacity: 4,500 lbs. (2041 kg)
Minimum Height: 7 7/8″ (200mm)
Maximum Height: 19 1/4″ (489mm)
#314110 (38 lbs)

 

 

 


 

 

HEAVY– DUTY WINCHHeavyDutyWinch

For loading disabled vehicles onto the frame rack.
#784166 (49 lbs)

 

 

 

 


 

Single Wheel Stand

singlewheelstand573135
Single Wheel Stand (order (4) for a set)
#573135 (20 lbs)

 

 

 


 

WHEEL STANDS

WheelStands
Versatile to fi t multiple-size hubs for all vehicles.
#784155 (33 lbs)

 

 

 

 


 

JACKING BEAM

Versatile beam that slides between the treadways, allowing underbody adjustments.JackingBeam
#554045 (40 lbs)

 

 

 


 

 

STACKING MUGSStackingMugs

Replace those old dangerous wood blocks with a set of steel stacking mugs to help support and secure the frame for pulling.
#873150 (Set of 5 –100 lbs)